50*65cm Mini 3000MW Blue CNC Laser Engraving Engraver Machine 2Axis DC 12V DIY Desktop Wood Router/Cutter/Printer

-
Description:
This 3000mW DIY desktop blue laser engraving machine is ideal for amateur
laser engraving usage with grayscale printing,low-light positioning and freedom
positioning functions.It only need you to connect it to the computer,then you can
print any pictures your like with your own creativity.

Specifications:
Material:stainless steel and acrylic
Working Voltage:DC 12V
Laser Power:3000mW
Engraving Area:65x50cm(maximum)
Size:72x63cm
Control software: benbox software support power can be adjusted, weak light positioning

Engraving Material Note:
1.can engraving materials:wood,bamboo,plastic,paper,leather,bank card,rubber
2.can not engraving material:metal,stone,ceramic,shell,light-reflecting material,
transparent material

Cutting Material:
It can only cut foam,paper,thin leather material.

评论

发表评论

此博客中的热门博文

TC55V 4 axis with 3.5 Inch Color LCD CNC controller

-
图片
Main Functions Automatically execute:Actual running, Dry running, Single-step execution, Terminate program, Start and Pause function Manual operation:Manual high speed, Manual low speed, Jog operation, Back to program zero, Back to machine zero Program management:absolute programming, Incremental programming, linear and circular interpolation, back to machine zero, sub-program call,register, delay, repeat, Output, PLC set, Pause Parameter settings:Set various control parameters of processing and operation, get the best status of processing effect Exterior Manual Operation: control motor clockwise and counter-clockwise spinning, Start, Pause, Alert and Emergency Stop. USB Connection and upgrade PLC Extension I/O Extension Isolated I/O port Chinese/English panel display Free change of boot picture Technical Specifications Minimum data unit 0.001 mm Maximum data size ± 99999.999mm Maximum Speed: 9000mm/min (pulse is 0.001mm) Maximum pulse output frequenc...
More »

New TC55H 1-4 Axis CNC controller

-
图片
1. Product Introduction TC55H is an upgrading version of TC55. It can control 4 feeding axis, 1 analog spindle. It is equipped with 16  input port and  8 output port, supporting importing G code files from USB stick.   Support saving the current coordinates after power off.  2. Technical Specifications  Minimum data unit 0.001 mm Maximum data size ± 99999.999mm Maximum Speed: 24m/min (pulse is 0.001mm) Maximum pulse output frequency 400KHz Axis 1-4 (X,Y, Z,C) X,Y,Z,C axis can conduct linear interpolation, X,Y can do circular interpolation.  Electric Gear: numerator :1-99999 denominator: 1-99999  USB: I...
More »

Your Ultimate Guide to GRBL Offline Controller for Engraving Machines

-
If you're looking for a powerful and versatile offline controller for your desktop engraving machine, then you'll want to check out the GRBL offline controller. In this guide, we'll take a closer look at what the GRBL offline controller is, how it works, and how it can benefit your engraving workflow. What is the GRBL Offline Controller? The GRBL offline controller is a device that allows you to control your engraving machine without the need for a computer or internet connection. It runs on the GRBL firmware, which is an open-source, high-performance software that controls CNC machines. With the GRBL offline controller, you can load G-code files onto an SD card and use the controller to execute the code and control your machine. How Does the GRBL Offline Controller Work? The GRBL offline controller works by connecting to your engraving machine's control board and executing G-code commands stored on an SD card. It features a user-friendly interface with a 3.5-inch touch...
More »