3 Axis/4 Axis DDCSV1.1 500KHz 3 Linkage Motion Offline Control System Controller G Code

The DigitalDream CNC has engaged in the numerical control industry for 7 years,specializing in the research, 

development and production work of various CNC(ComputerNumerical Control)systems with high quality, high reliability.

It can produce the common Brushless DC motor, Stepper motor driver as well as the 1 axisCNC system to 6 axesCNC

system. 

The DDCSV1 is the 3 axis and 3 axes motion controller which has been researched anddeveloped by Faster CNC for four 

years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output 

pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.

The DDCSV1 numerical control system adopts the ARM+FPGA design framework.

The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design,reliable control  and easy operation.

The panel layout structure of DDCSV1 is rational. The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set.

Performance parameter

• Ordinary digital input interface of 16-circuit optocoupler coupling isolation
  
  
• 16 channel optocoupler common digital input interface;

• 3 channel optocoupler common digital output interface;

• 1 channel, 0-10V spindle speed control analog output interface(which can be modified into PWM output);

• Support 3 channel stepper motor control, single channel maximum 500KHz control pulse output;

• ARM9 master control chip;

• FPGA core algorithm chip;

• 4.3 inch TFT screen, resolution 480*272;

• 17 operation keys (one spare key, no definition);
  
  
• The main control equipment for 18V-32V power input, the current capacity is not less than 0.5A

• Support U disk read G instruction, G instruction file size no requirements;

• Equipped with hand and pulse interface, support the company's digital hand, while supporting the common hand in the market.

• The support panel key point and single axis manual operation;

• Support for fast running position operation;

• Support for multi coordinate system (Automatically save after power off);

• Support save breakpoint function (run by the pause button to automatically save); 

 

Official website