WHB04B USB MACH3 Wireless Handwheel

 

1  x Wireless  4 Axis / 6 Axis MACH3 Handwheel ( New Type)

1  x USB Wireless Receiver

whb04b manual

  

Communication channel: ISM, 433MHZ

Power: two AA alkaline batteries

Wireless transmission distance: 40 meters barrier-free

Encoder: 100PPR

Button: 16 (supports 10 macro code buttons)

Transmitting power: 10DB

Acceptance sensitivity: -98DB

Maximum number of axes: 6 axes

Display: dot matrix LCD backlit display

Material: ABS and PC materials, good resistance to drop and heat resistance, and silicone sleeve protection

1, using frequency hopping transmission, anti-interference ability

    Using 433MHZ, ISM wireless FR transmission technology, transmit power 10DB, to accept the sensitivity-98DB. With 32 frequency hopping channels, each channel spacing 1MHZ.

    Intelligent wireless technology, to achieve automatic frequency hopping, automatic power savings, automatic ID code learning.

    Frequency hopping transmission technology, the same room, can support 32 sets of equipment used at the same time, without affecting each other.

2, LCD display

    Displays the mechanical and workpiece coordinates of the X Y Z axis.

    Displays the spindle speed value and the machining feedrate value.

    Dot matrix LCD with backlight.

3, axis selection, the rate of band switching control

    Axis selection band switch to achieve the electronic handwheel off and the corresponding X Y Z A axis function of the selection control Magnification Select the band switch to achieve the choice of step value, simple and convenient.

  

        RESET button

-----------------------------------------------------------------------------------------------------------------------------------

     Stop button

------------------------------------------------------------------------------------------------------------------------------------

     Start/Pause button:When machine stops,press the button,machine starts to work;When machine is working, press the button,machine stop working.

------------------------------------------------------------------------------------------------------------------------------------

     Macro-1/Feed+ button:When press the button alone,macro function-1 works;

              When press the  +  ,Processing speed increase.

------------------------------------------------------------------------------------------------------------------------------------

     Macro-2/Feed- button:When press the button alone,macro function-2 works;

              When press the  + ,Processing speed decreases.

------------------------------------------------------------------------------------------------------------------------------------

     Macro-3/Spindle- button:When press the button alone,macro function-3 works;

              When press the  +  ,Spindle speed increases.

------------------------------------------------------------------------------------------------------------------------------------

     Macro-4/Spindle- button:When press the button alone,macro function-4 works;

              When press the  +  ,Spindle speed reduction.

------------------------------------------------------------------------------------------------------------------------------------

     Macro-5/M-HOME button:When press the button alone,macro function-5 works;

              When press the   +  ,refer all home.

------------------------------------------------------------------------------------------------------------------------------------

     Macro-6/M-HOME button:When press the button alone,macro function-6 works;

              When press the  +  ,Return to the safe height of the Z axis

------------------------------------------------------------------------------------------------------------------------------------

     Macro-7/W-HOME button:When press the button alone,macro function-7 works;

              When press the  +  ,go to zero work.

------------------------------------------------------------------------------------------------------------------------------------

     Macro-8/S-ON/OFF button:When press the button alone,macro function-8 works;

              When press the  +  ,Spindle on or off.

------------------------------------------------------------------------------------------------------------------------------------

     Macro-9/ probe-Z button:When press the button alone,macro function-9 works;

              When press the  +  ,probe Z.

------------------------------------------------------------------------------------------------------------------------------------

    Macro-10 button:press the button,macro function-10 works.

------------------------------------------------------------------------------------------------------------------------------------

    Function button:When you press the button, then press the other button to achieve the combination function. 

------------------------------------------------------------------------------------------------------------------------------------

        MPG button:press the button,Hand wheel into Continuous mode.

------------------------------------------------------------------------------------------------------------------------------------

     Step button: press the button,Hand wheel into Step mode.

------------------------------------------------------------------------------------------------------------------------------------

          Axis selection band switch: OFF position to switch off MPG.

                      X,Y,Z,A,B,C: 6 axis selection function.

------------------------------------------------------------------------------------------------------------------------------------

          Selection speed:0.001（2%）:When handwheel in Step mode,move unit 0.001;when in Continuous mode,move speed is 2% 0.01(5%):When handwheel in step mode,move unit 0.01;when in Continuous mode,move speed is 5% 0.1(10%):When handwheel in step mode,move unit 0.1;when in Continuous mode,move speed is 10% 1.0(30%):When handwheel in step mode,move unit 1.0;when in Continuous mode,move speed is 30% 60%:When handwheel in Continuous mode, move speed is 60% 100%:When handwheel in Continuous mode,move speed is 100%

                                       Lead location: Processing lead mode: By shaking the MPG to change the processing speed.