CNC mach3 4 Axis Controller TB6560
Applicable to the stepper motor: 42,57,86-type phase current is less than 3A of the 2-phase 4-phase (4-wire line and 8 lines)
1.Maximum phase current output of 3.5A, the average output of 2.5A.
2.with spindle control relay, mach3, etc. easy to use software to control the start and stop of the spindle.
3.high speed optocoupler DC / DC fully isolated from the true sense of protecting your computer.
4.with 5-axis expansion, and convenience you require 5-axis machining, 5-axis extension.
5.Standard parallel port interface, support for MACH2, KCAM4 series software.
6.Supports four sub select - 1,1 / 2,1 / 4,1 / 16.
7.four input control, you can set the limit, stop, reset, which is divided into the knife.
8.support four operating modes - mixed-mode, fast mode, slow mode, the ordinary mode.
9.the semi-flow control functions, effective to stop the motor when the current drops to a minimum.
10.Have fan interface, you can add a fan to the board.
1.Maximum phase current output of 3.5A, the average output of 2.5A.
2.with spindle control relay, mach3, etc. easy to use software to control the start and stop of the spindle.
3.high speed optocoupler DC / DC fully isolated from the true sense of protecting your computer.
4.with 5-axis expansion, and convenience you require 5-axis machining, 5-axis extension.
5.Standard parallel port interface, support for MACH2, KCAM4 series software.
6.Supports four sub select - 1,1 / 2,1 / 4,1 / 16.
7.four input control, you can set the limit, stop, reset, which is divided into the knife.
8.support four operating modes - mixed-mode, fast mode, slow mode, the ordinary mode.
9.the semi-flow control functions, effective to stop the motor when the current drops to a minimum.
10.Have fan interface, you can add a fan to the board.
评论
发表评论